QSC - PLX3602 Specifications

PLX3602 Specifications

The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability.

The PLX3602 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3602 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.

SPECIFICATIONS	PLX3602
	STEREO MODE, both channels driven *
8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD	725 W 775 W
4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD	1100 W 1250 W
2 ohms EIA 1 kHz 1% THD	1800 W
	BRIDGE MONO MODE *
8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD	2500 W 2600 W
4 ohms 1 kHz 1% THD	3600 W

Signal to Noise (20 Hz - 20 kHz)	-107 dB
Input Sensitivity @ 8 ohms	1.25 Vrms
Gain @ 8 ohms	36 dB
Output Circuitry	2-Tier Class H
Distortion (SMPTE-IM)	Less than 0.02%
Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz	Less than 0.02% Less than 0.02%
Frequency Response	20 Hz-20 kHz, -0.5 dB
Damping Factor	Greater than 500
Input Impedance	20k ohms balanced 10k ohms unbalanced
Input Clipping	11 Vrms (+21 dBu)
Cooling	Variable-speed fan, rear-to-front air flow
Input Connectors, each channel	3-pin XLR and 1/4" TRS balanced
Output Connectors, each channel	Neutrik® NL4 Speakon® and Touch-proof binding posts (Both channels available on Ch 1 NL4 connector)
Rear Panel Switches	Input Configuration: Bridge/Stereo/Parallel Clip Limiters each channel Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic)
Front Panel Controls	Detented Gain Attenuator: 0 to ∞ dB Power On/Off
Front Panel Indicators	Clip: Red LED -10: Green LED Signal (-35 dB): Green LED Power: Blue LED Parallel: Amber LED Bridge Mono: Amber LED
PROTECTION
Amplifier Protection	Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection Stable into reactive or mismatched loads
Load Protection	On/off muting, DC-fault power supply shutdown
Infrasonic	-3 dB, 5 Hz
DC fault	Power supply shutdown
Ultrasonic	-3 dB, 85 kHz
Short Circuit	Cutback
Thermal	Muting at 90° C
Over Current	Active clip limiting Power supply cutback
High Line	Standard +15%, survive +25%
Low Line	-33%
PHYSICAL
Dimensions Height Width Depth, Rack mounting surface to rear panel Overall Depth	3.5" (8.9 cm) 2 rack spaces 19" (48.3 cm) 12.8" (32.6 cm) 14.875" (37.9 cm)
Weight	21 lbs. (9.5 kg) net 26 lbs. (11.8 kg) shipping
Agency Approvals	CE, FCC, cUL, UL

* CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN-61000 AC harmonic limits

CURRENT CONSUMPTION		PLX3602
1/8 Power (pink noise)	8 ohms 4 ohms 2 ohms	7.7A/120V 11.5A / 120V 18A / 120V
1/3 Power (pink noise)	8 ohms 4 ohms 2 ohms	13A/120V 19.5A / 120V 31A / 120V
Full Power	8 ohms 4 ohms 2 ohms	25A/120V 40A / 120V 63A / 120V
Notes		Long term, active-limited to 30A/120V

All Specification Subject to Change Without Notice.

TOP

Speakon is a registered trademark of Neutrik

Español Deutsch

PLX2 SERIES AMPLIFIERS

DOCUMENTS

PLX2 Specifications (PDF 275K)
User Manual (PDF 4.7MB)

WHERE TO BUY

Buy Online
Hear it Today at an authorized QSC dealer
Contact a sales representative

HI-RES IMAGES

Image Gallery
PLX3602 Front Panel
PLX3602 Front Left View
PLX3602 Front Right View
PLX2 "02" Rear Panel
PLX2 "02" Rear Left View
PLX2 "02" Rear Right View
PLX2 "02" Models Stack
PLX2 Family Stack

FREE 6-YEAR EXTENDED WARRANTY

Register your PLX2 amplifiers online to get the free 6-year extended warranty.

Click here to register for the 6-year Extended Warranty

The PLX2 "02" Models: PLX1802, PLX2502, PLX3102 & PLX3602